INPUTS
· 2 SD/HD/3G HD–SDI on BNC connectors,
· 1 HDMI connectors,
· 1 DVI–D connector,
· 1 computer graphics (RGBHV & RGsB) on 5 BNC connectors,
· 2 CV (NTSC/PAL/SECAM) on BNC connectors,
· 1 s–Video (NTSC/PAL/SECAM) on 2 BNC connectors,
· 1 component video (YPbPr) on BNC connectors,
· 4 AES 48KHz digital audio pairs on BNC connectors
GENLOCK INPUTS
· 1 SD/HD/3G HD–SDI with active loop,
· 1 analog bi–level or tri–level sync or black & burst with active loop
OUTPUTS
· 1 SD/HD/3G HD–SDI on a BNC connector,
· 1 DVI–D connector,
· 1 component video (YPbPr) on BNC connectors,
· 4 AES 48KHz digital audio pairs on BNC connectors
VIDEO I/O FORMATS
· Input and output: 480i, 576i, 720p23.98/24/25/29.97/30/50/59.94/60, 1080i50/59.94/60, 1080p23.97/24/25/30/50/59.94/60, 1080sfp23.97/24/25
· Input only: 2Kp23.97/24/25/30/50/59.94/60
COMPUTER GRAPHICS INPUT FORMATS
· 640x480, 800x600, 852x480, 853x480, 1024x600, 1024x768, 1280x720, 1280x768, 1280x800, 1360x768, 1365x768, 1366x768, 1368x768, 1400x768, 1440x900, 1600x900, 1366x1024, 1400x1050, 1680x1050, 1600x1200, 1920x1080, 1920x1200, DVI/HDMI only 2048x1080
CLOSED CAPTION & TIMECODE SUPPORT
· Composite, s–Video & YPbPr inputs: CC & VITC/embedded LTC for SD only
· YPbPr output: CC support only
· SD/HD/3G HD–SDI inputs & output: CC & VITC support, HD & SD
SIGNAL PATHS
· 10–bit SD/HD/3G HD–SDI, 10–bit ADCs for composite, s–Video, 12–bit ADCs for component & VGA video, 8/10/12–bit HDMI, 8–bit DVI support. All video buses are 10 bit, internal processing up to 16 bit as required by each process
OPERATING MODES
· MEMC Standards Conversions with image enhancement processing and filtering,
· Motion Adaptive mode for format conversion without frame rate conversion,
· Low latency mode with reduced processing
OPERATING TEMPERATURE
· 0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE
· –30° to +70°C (–22° to 158°F)
HUMIDITY
· 10% to 90%, RHL non–condensing
INCLUDED ACCESSORIES
· DVI–D cable, power cord, user manual/CD
POWER
· Dual redundant integral PSUs, 100–240VAC 50/60Hz, via 2 IEC connectors. Can run on one or both PSUs, fan cooled for installation in equipment racks, separate PSU cooling for high reliability
· front standby/on control key with switch–off time delay, selectable PSU failure indication
PRODUCT DIMENSION
· 19" x 7.24 x 2U (43.6cm x 18.40cm 8.80cm) W, D, H
PRODUCT WEIGHT
· 1.8kg (4.1lbs) approx
SHIPPING WEIGHT
· 2.5kg (5.5lbs) approx